High Tensile Field Fence: Answers on Sizes, Coatings and Ordering

Top and bottom wires are available from 2.0 mm to 3.5 mm in diameter. Internal wires range from 1.8 mm to 2.5 mm. The material grade is high-tensile steel. Include the wire positions and diameters in the quotation request so the supplier can match the fence to the intended use.

Longitudinal mesh openings are available in 15, 18, 20, 40, 50, 60 and 65 cm. Lateral openings are 6, 8, 10, 11, 13, 14 and 15 cm. The graduated arrangement uses smaller openings toward the lower part of the fence and wider openings toward the top.

For a pasture boundary, review the lower openings against the animals being contained and the upper openings against the required fence layout. Send both longitudinal and lateral dimensions when asking for a quotation.

Available heights range from 0.8 m to 2.4 m, with listed options including 0.9 m, 1.0 m, 1.1 m, 1.2 m, 1.5 m, 1.6 m, 1.8 m and 2.0 m. The standard length is 50 m.

Measure the boundary, gate locations and corners before calculating the roll quantity. If the project uses several fence heights, separate the quantities by height in the inquiry.

Surface treatments include hot-dipped galvanized and PVC coated. The galvanized option is listed with Class 3 zinc coating. State the required surface treatment clearly with the wire diameters, mesh openings, height and roll length.

Applications include livestock fencing, pastoral areas, family farms, forestry, construction boundaries and ecological protection projects. A pasture operator may use it for planned grazing areas, while a forestry or construction project may use it for a defined boundary. The appropriate height and mesh configuration depend on the animals, terrain and boundary purpose.

Yes. Customization is available for wire diameter, mesh size and height. Send the intended application, animal type or boundary use, required height, longitudinal and lateral mesh openings, wire diameters, coating, roll length and estimated quantity. These details give the supplier the information needed to confirm the requested specification.